http://www.going-twice.com/listings/index.php http://www.going-twice.com/listings/index.php?a=2&b=10713 http://www.going-twice.com/listings/index.php?a=2&b=10713 Sun, 09 Jun 2013 16:51:34 -0600 Description:
COMES WITH TOOLING
BEDWAYS ARE ON NEW CONDITION

VISIT OUR SHOWROOM

LATOOL
161 WOODFORD AVR UNIT 8
PLAINVILLE CT 06062
860 796 0230

]]> http://www.going-twice.com/listings/index.php?a=2&b=10712 http://www.going-twice.com/listings/index.php?a=2&b=10712 Sun, 09 Jun 2013 16:51:23 -0600 Description:
COMES WITH TOOLINGINCH / METRIC

VISIT OUR SHOWROOM

LATOOL
161 WOODFORD AVR UNIT 8
PLAINVILLE CT 06062
860 796 0230

]]> http://www.going-twice.com/listings/index.php?a=2&b=10711 http://www.going-twice.com/listings/index.php?a=2&b=10711 Sun, 09 Jun 2013 16:51:13 -0600 Description:
please call for details comes with tooling
860 796 0230

13" SWING X 39.3" BETWEEN CENTERS

D1-4 CAMLOCK SPINDLE

HOLE THROUGH SPINDLE 1.4"

8- SPEEDS 50- 2000RPM

HEADSTOCK TAPER 5MT, TAIL STOCK 3MT

INCH MACHINE

3HP 220V 3 PHASE
Emco Maximat V13 was supplied with a hardened bed as standard. Believed to have been based on a French Vernier design (Emco had bought the company) and also sold badged as the Vöest DA160, it was probably the largest conventional centre lathe ever listed by Emco Maier and offered a remarkable amount of capacity on a very compact footprint. The electrical controls were to a much higher industrial specification than the company's other offerings, with the motor switch controlled by a traditional and very safe "third-shaft" with the lever pivoting from the lower right-hand side of the apron within easy reach of the operator in any normal working position. The lathe had a centre height of 165 mm (6.5") and a standard bed length of 850 mm (33.5") or 1000 mm (39.4") for the long-bed version. The hole through the headstock spindle was 36 mm (1.4") and the standard-fit two-speed 1.7/2.2 kW (2.3/3.0 h.p.) motor drove through a Poly-V belt to give a total of 16 speeds from 30 to 2500 rpm. The tailstock taper was 3 Morse taper and the barrel had a travel of 100 mm (4").
Totally enclosed with all-lever control, the screwcutting gearbox was ran in an oil bath and transmitted power to the feed shaft through a slipping clutch designed to prevent damage in the case of mishandling by the operator; Emco also claimed that this feature allowed turning up to a shoulder with automatic slip once reached. In normal use the leadscrew, driven by a dog clutch, was used only for cutting threads and was otherwise left stationary. 28 metric threads were available spanning 0.4 to 7 mm while the Imperial version provided 24 inch pitches from 4 to 56 t.p.i. An optional changewheel set converted both metric and Imperial machines to translate the other's threads - and also allowed 28 module pitches from 0.2 to 3.5 and 32 diametral pitches from 8 to 112 DP to be generated.
Changewheel sets to extend threading ranges were also available (and might have been supplied as part of the standard equipment for some markets). For Imperial (inch) they comprised: 42t, 55t, 60t, 63t, 65t, 75t, 80t, 90t, 96t and 120t. For metric models the set was: 30t, 50t, 60t, 63t, 65t, 70t, 75t 95t, 110t and 120t.
http://www.youtube.com/user/alexandernow99?feature =mhee,

]]> http://www.going-twice.com/listings/index.php?a=2&b=10709 http://www.going-twice.com/listings/index.php?a=2&b=10709 Sun, 09 Jun 2013 16:50:41 -0600 Description:
WE HAVE A GOOD ASSORTMENT OF MILLS 1 HP 1-1 2 AND 2 HP MACHINE 32" TO 48" COPY AND PASTE
WWW.CTMILL.COM
CLICK ON MACHINE INVENTORY
WE CAN SAVE YOU MONEY

VISIT OUR SHOWROOM
LA TOOL
161 WOODFORD AVE
PLAINVILLE CT 06062
UNIT 8

]]> http://www.going-twice.com/listings/index.php?a=2&b=10708 http://www.going-twice.com/listings/index.php?a=2&b=10708 Sun, 09 Jun 2013 16:50:18 -0600 Description:
Wasino Engine Lathe
Model LED-15A, S/N 4411-1401H, 20" Swing, 60" we will include 10" buck chuck also a 4 jaw also tool holder
860 796 0230 COMES WITH TOOL PACKAGE CALL FOR DETAILS,,
860 796 0230 LA TOOL
PLAINVILLE CT
http://www.youtube.com/watch?v=rWj9xKbqyVc&list=UU RuSeO3KREdnpBzwKIKcDjA&index=5

,,,check it out on you tube copy and paste the link


WE OFFER THE FOLLOWING FOR YOUR CONSIDERATION:



21" X 60" WASINO "WILDCAT" LEO ENGINE LATHE W/ IN/MM THREADS

************************************************** ********************



INVENTORY #: 11993 SERIAL #: NA YEAR BUILT:



SPECIFICATIONS



SWING OVER BED 19-1/4" OR 21-2/3"

SWING OVER CROSS SLIDE 20-7/8" OR 23-1/4"

DISTANCE BETWEEN CENTERS 60"

SPINDLE BORE 2-1/8"

SPINDLE NOSE D1-6 CAMLOCK

SPINDLE SPEEDS 19 TO 1,500 RPM (16)

THREADS - INCH 4 TO 28 TPI

METRIC 1 - 7 MM

FEEDRATES .002 TO .0276"/REV

TAILSTOCK QUILL #4 MT

QUILL TRAVEL 6"



MAIN DRIVE MOTOR 10 HP



EQUIPPED WITH: COOLANT SYSTEM

THREADING DIAL

MICRO CARRIAGE STOP

4 JAW CHUCK















ELECTRICS: 220/440 WEIGHT: 5000 LBS

http://www.youtube.com/user/alexandernow99?feature =mhee,,
http://www.youtube.com/my_videos?feature=mhee
http://www.youtube.com/watch?v=rWj9xKbqyVc&list=UU RuSeO3KREdnpBzwKIKcDjA&index=5

]]> http://www.going-twice.com/listings/index.php?a=2&b=10707 http://www.going-twice.com/listings/index.php?a=2&b=10707 Sun, 09 Jun 2013 16:49:49 -0600 Description:

KeyLynx Surplus Store

Come on down to the open warehouse.
June 1, 2013 9:00am to 12:00pm

we are doing a summer clean out sale.
furniture, tooling, machines, and many more things.

Cash and carry.
will have fork truck to load you up.



located at 122 Prospect Hill Rd,East Windsor,CT,06088
860-654-0042




]]>